Differences

This shows you the differences between two versions of the page.

--- avaya:aads:upgradepath [2024/03/14 21:38] – [to Version 10.1.1.2.63] admin
+++ avaya:aads:upgradepath [2026/01/20 21:45] (current) – external edit 127.0.0.1
@@ Line 2: / Line 2: @@
 **Don't skip Upgrade Steps!**\\
 In case of an AADS Cluster. Steps have to be done on both Servers. Services can only be be started if both Server have been upgraded!\\
+After each step check AADS Replication with SMGR!\\
 ===== to Version 8.0 =====
   cd ~
@@ Line 90: / Line 94: @@
   sudo ./update.sh --stage
   rm -rf ucapp-system-3.5.0.0.14 ucapp-system-3.5.0.0.14.tgz
-##sudo vi /etc/selinux/config #permissive
+Change SELINUX config:\\  SELINUX=enforcing to SELINUX=permissive
+  sudo sed -i 's/SELINUX\=enforcing/SELINUX=permissive/g' /etc/selinux/config #Use vi or nano if sed is not working.
+  sudo cat /etc/selinux/config
   sudo reboot
   sysUpdate --install
-  chmod 755 a aads-8.1.5.0.280.bin
+  chmod 755 aads-8.1.5.0.280.bin
   app removeinactive
   app upgrade aads-8.1.5.0.280.bin
   svc aads restart
+In case Replication is not working run:
+  sudo ./aads-fixDRSReplication.bin -- --install
 ===== to Version 10.1.0 =====
+**If Utility Server is used take a Backup of the existing Configuration. Screenshot installed Phone Software. It must reinstalled manually after migration!**\\
 Deploy AADS 10.1.0 ova\\
@@ Line 119: / Line 130: @@
   sudo ./aads-fixDRSReplication.bin -- --install
-===== to Version 10.1.1.0 =====
+===== to Version 10.2.0.0.70 =====
   gzip -cd ucapp-system-4.0.0.0.7.tgz | tar xvf -
@@ Line 130: / Line 141: @@
   av-update-os AV-AADS10.1-RHEL8.4-SSP-002-04.tar.bz2
 After Reboot:
+  av-update-os AV-AADS10.1-RHEL8.4-SSP-006-02.tar.bz2
+After Reboot:
+  svc aads start
   app configure  ##Goto: Clustering Configuration\Cluster Utilities\Configure SSH RSA Public/Private Keys
-  chmod 755 aads-10.1.1.0.192.bin
+  chmod 755 /home/admin/aads-10.2.0.0.70.bin
-  tmux
+  app upgrade /home/admin/aads-10.2.0.0.70.bin
-  app upgrade aads-10.1.1.0.192.bin
   svc aads restart
-  chmod 755 aads-fixDRSReplication.bin
+  sudo ./us-http-port.sh --enable
-  sudo ./aads-fixDRSReplication.bin -- --install
-===== to Version 10.1.1.19 =====
+**If needed, don't forget to restore UTS Custom Files and reinstall Phone Firmware Files!**\\
-  svc aads stop
-  av-update-os AV-AADS10.1-RHEL8.4-SSP-003-02.tar.bz2
-After Reboot:
-  svc aads start
-  chmod 750 /home/admin/aads-10.1.1.1.19.bin
-  app removeinactive
-  tmux
-  app upgrade /home/admin/aads-10.1.1.1.19.bin
-  chmod 755 aads-fixDRSReplication.bin
-  sudo ./aads-fixDRSReplication.bin -- --install
-===== to Version 10.1.1.2.63 =====
-  svc aads stop
-  av-update-os AV-AADS10.1-RHEL8.4-SSP-005-04.tar.bz2
-After Reboot:
-  svc aads start
-  app removeinactive
-  chmod 750 /home/admin/aads-10.1.1.2.63.bin
-  tmux
-  app upgrade ./aads-10.1.1.2.63.bin
-  chmod 755 aads-fixDRSReplication.bin
-  sudo ./aads-fixDRSReplication.bin -- --install
-===== to Version 10.1.1.3.13 =====
-  tmux
-  app install ./aads-10.1.1.3.13.bin

Detach Close

This topic does not exist yet

You've followed a link to a topic that doesn't exist yet. If permissions allow, you may create it by clicking on Create this page.